54
A1040 MIRA 3D
© 2021 Acoustic Control Systems – ACS Group
MAP
MAP
19
MAP
MAP mode allows the operator to carry out areal scanning of inspected objects. The
operator is given a great variety of function to setup: area of interest, its
dimensions, step size, scanning direction etc. Apart from this setting, the software
has a number of integrated visualization features, data representation modes and
analysis tools. Operator of can observe results of scanning even in real time while
progressing with data collection. Description of functions, parameters and settings
is given in the following chapters.
19.1 Main parameters
Main parameters of MAP mode are listed in corresponding tab as it shown below.
In MAP mode in comparison to B-Scan mode the list of main parameters has been
extended. For description of standard parameters refer
. Additional MAP
parameters are listed in table below.
47
