27
A1040 MIRA 3D
© 2021 Acoustic Control Systems – ACS Group
Rechargeable Battery of the Control Unit
Rechargeable Battery of the Control Unit
Charging of the Control Unit
1. Connect one end of the USB-C cable to the USB-C power supply, and the other
end to the USB-Connection of the Control Unit
2. Connect the USB power supply to the mains socket.
3. When the charging process begins, the display of the Control Unit states, that
the device is charging. When the device is fully charged, the percentage value
next to the battery symbol shows 100 %. When the battery is charged 100 %,
the charging process is switching to trickle charge.
4. Separate the charging unit from the device, as the rechargeable battery has
completely been charged.
5. First disconnect the charger from the device and then from the mains socket.
Charge mobile control only with dedicated cable. For more information refer
.
Tips and precautions for charging the battery
·
In normal mode the device switches OFF as soon as the level drops beyond a
certain safety limit. It is recommended not to restart the device before the
charging procedure is complete to avoid damage.
·
When the battery is discharged, the device will not turn on immediately after it
has been connected to the charger. Charge the battery for a few minutes
before turning the device back on.
11
