33
A1040 MIRA 3D
© 2021 Acoustic Control Systems – ACS Group
Safety
Safety
Specific safety instructions:
All laser outlets are marked with the following symbol
Protective measures:
·
Work with laser systems may only be carried out by trained and qualified
persons.
·
Avoid looking directly into the laser beam (direct or reflected beam).
·
If the lasers are not needed, switch the lasers off.
·
If you do not work directly with the laser, keep your distance to the equipment.
·
Laser radiation, may only extend as far as necessary for the task at hand.
·
Do not wear watches and jewelery during the use of the lasers to avoid
accidental reflections.
·
The beam cross section must not be reduced.
·
Laser equipment shall be installed or secured in such a way as to avoid any
unintentional change in its position and beam direction, including those
located in the beam path.
·
A minimization requirement applies both with regard to the spatial size of the
laser area and the number of people staying in the laser area.
·
Keep laser under lock to prevent misuse.
