13
A1040 MIRA 3D
© 2021 Acoustic Control Systems – ACS Group
Scope of Delivery
Scope of Delivery
Reference block for
functional tests
1
x
Exchangeable Li-Ion
accumulator
12
inside the electronic unit
Power charger
2
y
Interchangeable power
plugs (US/UK/EU)
6
inside the pocket
z
, 2xUS, 2xUK and
2xEU
Power USB-C cable
2
inside the pocket
z
USB-A to USB-C cable
1
inside the pocket
z
Screwdriver Hex-Plus 4.0
1
{
Screwdriver Hex-Plus 2.0
1
|
Сardboard box for
documentation
1
}
Warranty certificate
1
inside the cardboard box
}
Operating Manual
1
inside the case
~
H-Fastener
2
refer to
v
on Figure 3
A2 M6x10 stainless screw
4
refer to
u
on Figure 3
Hard case with foam inlay
1
~
Electronic units
The A1040 MIRA 3D PRO has two electronic units. These are the
master
(also called
primary unit
) and the
slave
(also called a
secondary unit
).
The serial number of the master is less than then the serial number of the slave.
Use the master and slave according to the licensing
.
Assemble the A1040 MIRA 3D PRO
The A1040 MIRA 3D PRO tomograph leaves the factory fully assembled. Follow up
the given procedure to prepare a master to work as a stand-alone tomograph.
·
Put the A1040 MIRA 3D PRO on the flat stable surface. The transducers lay on the
surface.
·
Detach the Tablet-PC
·
Unscrew four screws
u
on the both sides of the tomograph, use the screwdriver
Hex-Plus 4.0 for unscrewing.
92
