Copyright © Acronis, Inc., 2000-2010
111
Use encryption
– you can opt for encrypted connection to the mail server. SSL and TLS
encryption types are available for selection.
Some Internet service providers require authentication on the incoming mail server before
being allowed to send something. If this is your case, select the
Log on to incoming mail
server
check box to enable a POP server and to set up its settings:
Incoming mail server (POP)
– enter the name of the POP server.
Port
– set the port of the POP server. By default, the port is set to 110.
User name
– enter the user name
Password
– enter the password.
Select the
Use the specified outgoing mail server
check box to enable an SMTP server and to
set up its settings:
Outgoing mail server (SMTP)
– enter the name of the SMTP server.
Port
– set the port of the SMTP server. By default, the port is set to 25.
User name
– enter the user name.
Password
– enter the password.
Click
Send test e-mail message
to check if the settings are correct.
Messenger service (WinPopup)
This option is effective for Windows and Linux operating systems.
This option is not available when operating under bootable media.
The option enables you to receive WinPopup notifications about about the recovery task's successful
completion, failure or need for interaction.
The preset is:
Disabled.
Before configuring WinPopup notifications, make sure the Messenger service is started on both the
machine executing the task and the machine that will receive messages.
The Messenger service is not started by default in the Microsoft Windows Server 2003 family.
Change the service Startup mode to Automatic and start the service.
To configure WinPopup notifications:
1.
Select the
Send WinPopup notifications
check box.
2.
In the
Machine name
field, enter the name of the machine to which notifications will be sent.
Multiple names are not supported.
3.
Under
Send notifications
, select the appropriate check boxes as follows:
When recovery completes successfully
– to send notification when the recovery task has
completed successfully
When recovery fails
– to send notification when the recovery task has failed.
The
When user interaction is required
check box – to send notification during the operation
when user interaction is required – is always selected.
4.
Click
Send Test WinPopup Message
to check if the settings are correct.
3.4.2.5
Event tracing
It is possible to duplicate log events of the recovery operations, performed on the managed machine,
in the Application Event Log of Windows; or send the events to the specified SNMP managers.