351
Copyright © Acronis, Inc., 2000-2010
You can specify a local folder on any volume, including a volume you are backing up.
Snapshot Storage Absolute Size
Description:
Specifies the initial size of the snapshot storage, in megabytes.
Possible values:
Any integer number between
0
and
2147483647
Default value:
0
If this setting is
0
, the management server uses the
Snapshot Storage Relative Size
setting.
The initial size will not exceed the available space minus 50 MB.
Snapshot Storage Relative Size
This setting is effective only when the
Snapshot Storage Absolute Size
setting is
0
.
Description:
Specifies the initial size of the snapshot storage as a percentage of the disk space
that is available at the time of starting the backup.
Possible values:
Any integer number between
0
and
100
Default value:
50
If this setting is
0
, the snapshot storage will not be created.
The initial size will not exceed the available space minus 50 MB.
Without the snapshot storage, taking snapshots is still possible.
The size of the snapshot storage does not affect the size of the backup.
7.2.1.5
Acronis Backup & Recovery 10
This section of the administrative template specifies the connection parameters and event tracing
parameters for the following Acronis Backup & Recovery 10 components:
Acronis Backup & Recovery 10 Management Server
Acronis Backup & Recovery 10 Agent
Acronis Backup & Recovery 10 Storage Node
Connection parameters
Remote Agent ports
Specifies the port that the component will use for incoming and outgoing communication with
other Acronis components.
Select one of the following:
Not Configured
The component will use the default TCP port number 9876.
Enabled
The component will use the specified port; type the port number in the
Server TCP Port
box.
Disabled
The same as
Not configured
.
Client Encryption options
Specifies whether to encrypt the transferred data when the component acts as a client
application, and whether to trust self-signed SSL certificates.
Select one of the following:
Not Configured
