Acromag IP440 Series, User Manual

Page: 17 / 22

SERIES IP440 INDUSTRIAL I/O PACK 32-CHANNEL ISOLATED DIGITAL INPUT MODULE
___________________________________________________________________________________________
- 16 -
CABLE: MODEL 5029-900
Type: Model 5029-900 APC8600 High-Density Cable: A 36-inch
long interface cable that mates the high-density (25mil pitch)
50-pin I/O connectors of the APC8600 PC/AT ISAbus carrier
board, to the high density connectors on the APC8600
Termination Panels (described below).
Application: Used with the APC8600 PC carrier and termination
panel. It mates the high-density (25mil pitch) 50-pin I/O
connectors of the APC8600 PC/AT ISAbus carrier board, to
the high density connectors on the APC8600 Termination
Panel (described below).
Length: 36-inches
Cable: 50-wire flat ribbon cable, 28 gage, Non-Shielded,
T&B/Ansley Part 135-050 or equivalent.
Headers: 50-pin, high-density, 25-mil pitch, female header.
Header- T&B Ansley Part 311-050302 or equivalent.
Keying: Headers at both ends have polarizing key to prevent
improper installation.
Shipping Weight: 1.0 pound (0.5Kg) packaged.
TERMINATION PANEL: MODEL 5025-552
Type: Termination Panel For AVME9630/9660 Boards
Application: To connect field I/O signals to the Industrial I/O
Pack (IP).
Termination Panel: Acromag Part 4001-040
(Phoenix Contact Type FLKM 50). The 5025-552 termination
panel facilitates the connection of up to 50 field I/O signals
and connects to the AVME9630/9660 3U/6U non-intelligent
carrier boards (A-D connectors only) via a flat ribbon cable
(Model 5025-550-x or 5025-551-x). The A-D connectors on
the carrier board connect the field I/O signals to the P2
connector on each of the Industrial I/O Pack modules. Field
signals are accessed via screw terminal strips. The terminal
strip markings on the termination panel (1-50) correspond to
P2 (pins 1-50) on the Industrial I/O Pack (IP). Each Industrial
I/O Pack (IP) has its own unique P2 pin assignments. Refer
to the IP module manual for correct wiring connections to the
termination panel.
Schematic and Physical Attributes: See Drawing 4501-464.
Field Wiring: 50-position terminal blocks with screw clamps.
Wire range 12 to 26 AWG.
Connections to AVME9630/9660: P1, 50-pin male header with
strain relief ejectors. Use Acromag 5025-550-x or 5025-551-
x cable to connect panel to VME board. Keep cable as short
as possible to reduce noise and power loss.
Mounting: Termination panel is snapped on the DIN mounting
rail.
Printed Circuit Board: Military grade FR-4 epoxy glass circuit
board, 0.063 inches thick.
Operating Temperature: -40
°
C to +100
°
C.
Storage Temperature: -40
°
C to +100
°
C.
Shipping Weight : 1.25 pounds (0.6kg) packaged.
TERMINATION PANEL: MODEL 5029-910
Type: Screw-Terminal Termination Panel For Acromag APC8600
PC/AT ISAbus Carrier Boards.
Application: This panel converts the high-density ribbon-cable
connectors coming from the APC8600 carrier board
(Acromag cable Model 5029-900) to screw terminals, for
direct-wired interfaces. This panel facilitates the connection
of up to 50 field I/O signals and connects to the APC8600
PC/AT ISAbus carrier board via high-density (25-mil pitch) flat
ribbon cable and connectors (see cable Model 5029-900).
The A & B connectors on the carrier board connect the field
I/O signals to the P2 connector on each of the Industrial I/O
Pack modules. Field signals are accessed via screw terminal
strips. Each Industrial I/O Pack (IP) has its own unique P2
pin assignments. Refer to the IP module manual for correct
wiring connections to the termination panel.
Field Wiring: 50-position terminal blocks with screw clamps.
Wire range 12 to 26 AWG.
Connections to APC8600: P1, 50-pin, high-density male header
with strain relief.
Mounting: Termination Panel includes mounting holes.
Printed Circuit Board: Military grade FR-4 epoxy glass circuit
board, 0.063 inches thick.
Operating Temperature: -40
°
C. to +85
°
C.
Storage Temperature: -55
°
C to +125
°
C.
Shipping Weight : 1.25 pounds (0.6kg) packaged.
TRANSITION MODULE: MODEL TRANS-GP
Type: Transition module for AVME9630/9660 boards.
Application: To repeat field I/O signals of IP modules A through
D for rear exit from VME card cages. This module is
available for use in card cages which provide rear exit for I/O
connections via transition modules (transition modules can
only be used in card cages specifically designed for them). It
is a double-height (6U), single-slot module with front panel
hardware adhering to the VMEbus mechanical dimensions,
except for shorter printed circuit board depth. Connects to
Acromag termination panel 5025-552 from the rear of the
card cage, and to AVME9630/9660 boards within card cage,
via flat 50-pin ribbon cable (cable Model 5025-550-X or 5025-
551-X).
Schematic and Physical Attributes: See Drawing 4501-465.
Field Wiring: 100-pin header (male) connectors (3M 3433-D303
or equivalent) employing long ejector latches and 30 micron
gold in the mating area (per MIL-G-45204, Type II, Grade C).
Connects to Acromag termination panel 5025-552 from the
rear of the card cage via flat 50-pin ribbon cable (cable Model
5025-550-X or 5025-551-X).
Connections to AVME9630/9660: 50-pin header (male)
connectors (3M 3433-1302 or equivalent) employing long
ejector latches and 30 micron gold in the mating area (per
MIL-G-45204, Type II, Grade C). Connects to
AVME9630/9660 boards within the card cage via flat 50-pin
ribbon cable (cable Model 5025-550-X or 5025-551-X).
Mounting: Transition module is inserted into a 6U-size, single-
width slot at the rear of the VMEbus card cage.
Printed Circuit Board: Six-layer, military-grade FR-4 epoxy glass
circuit board, 0.063 inches thick.
Operating Temperature: -40
°
C to +85
°
C.
Storage Temperature: -55
°
C to +105
°
C.
Shipping Weight: 1.25 pounds (0.6Kg) packaged.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com