background image

26 

Y1-03-0223 Rev. D 

APPENDIX B - SUPPORT, WARRANTY, USEFUL LIFE and NOTICES 

Support 

 
Contact your local dealer for Nauticast™-B AIS support. 
Please visit the ACR Website for Service centers near you. 

 
ACR Electronics Europe GmbH

 

ACR Electronics Inc. 

Technical Support 

Customer Service 

Handelskai 388 / Top 632 

5757 Ravenswood Road 

A-1020 Vienna, Austria 

Fort Lauderdale, FL 33312, U.S.A. 

Tel: 

+43 (1) 5 237 237 - 0  

Tel.:  

+1 (954) 981-3333 

Fax: 

+43 (1) 5 237 237 - 150  

Fax: 

+1 (954) 983-5087 

Email: 

[email protected]

  

Email: 

[email protected]

 

Web: 

www.acr-europe.com

  

Web: 

www.acrelectronics.com

 

 
Limited Warranty 

 

This  product  is  warranted  against  factory  defects  in  material  and  workmanship  for  a  period  of  1  (one)  year*  from  date  of 
purchase or receipt as a gift. During the warranty period ACR Electronics, Inc. will repair or, at its option, replace the unit

 

at 

no cost to you for labor, materials and return transportation from ACR. For further assistance, please contact our Technical 
Service  Department  at  ACR  Electronics,  Inc.,  5757  Ravenswood  Road,  Fort  Lauderdale,  FL  33312-6645.  Email: 

[email protected]

, Fax: +1 (954) 983-5087, Telephone: +1 (954) 981- 3333. 

 
This  warranty  does  not  apply  if  the  product  has  been  damaged  by  accident  or  misuse,  or  as  a  result  of  service  or 
modification  performed  by  an  unauthorized  factory.  Except  as  otherwise  expressly  stated  in  the  previous  paragraph,  THE 
COMPANY  MAKES  NO  REPRESENTATION  OR  WARRANTY  OF  ANY  KIND,  EXPRESS  OR  IMPLIED,  AS  TO 
MERCHANTABILITY,  FITNESS FOR A PARTICULAR PURPOSE, OR ANY  OTHER MATTER WITH RESPECT TO THIS 
PRODUCT. The Company shall not be liable for consequential or special damages. 
 
To place the warranty in effect, register online at 

www.acrelectronics.com

 or return the attached card within 10 days. 

 
*Five years for the following products: EPIRB, PLB, S-VDR, SSAS 
 

Useful Life Policy 

The typical service life of a properly maintained Product is limited to 12 years from date of manufacture. Products that are 12 
years and 1 month or older from date of manufacture will not be serviced by ACR or our Battery Replacement Centers. A 
Product that is 12 or less years old from date of manufacture will be serviced as long as the unit appears fit to be placed 
back  into  its  final  operational  cycle.  Service  includes  the  replacement  of  those  items  that  must  be  replaced  at  service 
intervals and the verification that the device appears to be in good mechanical and electrical working condition by an ACR 
authorized service technician. 
 

Other notices 

 
ACR  Electronics  diligently  works  to  provide  a  high  quality  Product  Support  Manual,  however,  despite  best  efforts, 
information is subject to change without notice, and omissions and inaccuracies are possible. ACR cannot accept liability for 
manual  contents.  To  ensure  that  you  have  the  most  recent  version  of  the  Product  Support  Manual,  please  visit  the  ACR 
website at 

www.acrelectronics.com

.  

 
In accordance with a policy  of continual development and product 

improvement the Nauticast™-B hardware and software 

may be upgraded from time to time and future versions of the Nauticast™-B may therefore not correspond exactly with this 
manual. When necessary, upgrades to the product will be accompanied by updates or addendums to this manual. 
 
©2008 by ACR Electronics, Inc., part of Cobham plc. All rights reserved. Reproduction in whole or in part is permitted only 
with permission of ACR Electronics, Inc. Ongoing product improvements may change product specifications without notice. 
 

This software uses components and source code developed by other companies or groups. 

Copyrights, trademarks or registered trademarks are the property of their respective owners.

 

 

Summary of Contents for AIS LINK2AIS - REV D



























Reviews: