Acopia ARX 1000, Hardware Installation Manual

Page: 40 / 78

Chapter 4
4 - 8
SFP Optical Connector
The Gigabit Ethernet optical ports use small form-factor pluggable (SFP)
optical transceivers that accept LC-style multi-mode fiber connectors. These
are for connection to Ethernet over fiber-optic cable.
WARNING
Fiber-optic ports are shipped with SFP optics installed. These ports must be
protected by a rubber grommet filler or a cable connector at all times to
prevent dust from collecting in the transceiver.
GND 4 green 5 5 green 5 Signal
Ground
GND 5 red 4 4 red
RxD 6 black 3 3 black 3 TxD
SCM/ACM
Console Port RJ-45 Rollover Cable RJ-45 to DB9 Adapter
Console
Device
Table 4.4 ACM Console Port Signaling/Cabling Using a Rollover Cable (Continued)