Acopia ARX 1000, Hardware Installation Manual

Page: 38 / 78

Chapter 4
4 - 6
Cable Connectors and Pinouts
Table 4.3 describes the cable connectors used on the ARX®1000 switch.
Interface Connector Purpose
Console RJ-45 Serial port for CLI access
MGMT RJ-45 Ethernet port for CLI or GUI access
Gigabit Ethernet...
Optical ports small form-factor
pluggable (SFP) Two optical ports for 1-Gbps Ethernet connections over multi mode
fiber
Copper ports RJ-45 Four 100/1000BASE-T Ethernet ports
Important
Fiber-optic ports are shipped with cable connectors installed. These
ports must be protected by a rubber grommet filler or a cable connector
at all times to prevent dust from collecting in the transceiver.
Table 4.3 Cable Connectors