Acopia ARX 1000, Hardware Installation Manual

Page: 37 / 78

Power Cord and Cable Requirements
ARX®1000 Hardware Installation Guide 4 - 5
Power Cord and Cable Requirements
Table 4.2 lists the required cables and power cords for the switch. All cables
except the AC power cord and console cable are customer-supplied.
Qty. Cable/Cord Used on... Specification
1 AC power cord AC/DC Power Supply You can choose from the two cables
shipped with the switch:
• 20 A/250 Vac or
• 15 A/120 Vac.
Both have IEC-320 type connectors.
1 Console cable with
RJ-45-to-DB9 adapter Console port 100BASE-T Category 5 unshielded
twisted pair (UTP); 24 AWG
1 Ethernet cable for
connection to 10/100 Mbps
Ethernet management port
(RJ-45 connector); MGMT interface
4 Ethernet cables for
connection to 100/1000
Mbps Ethernet
(RJ-45 connectors)
4 copper Gigabit Ethernet ports
a
100/1000BASE-T Category 5/6,
unshielded twisted pair (UTP) cable; 24
AWG.
a.Gigabit Ethernet ports support automatic MDI/MDIX cross-over. This feature automatically corrects the polarity of the
attached CAT5 cable, regardless if it is a cross-over or straight-through type. However, for this feature to work, the port
speed
must be set to
auto
(auto-negotiate) through the CLI. When the port speed/duplex is forced (auto-negotiate is
disabled), automatic MDI/MDIX cross-over is disabled, and you must cable the port using standard cross-over or
straight-through cabling.
2 Fiber-optic cables for
connection to 1-Gbps
Ethernet
small form-factor
pluggable (SFP) optical
connectors
2 optical Gigabit Ethernet ports 1000BASE-SX (Gigabit Ethernet) fiber
cable:
Short-reach multi-mode fiber (MMF) with
duplex LC-style connectors. Distances up
to 500m on 50/125um MMF, or 300m on
62.5/125um MMF.
Table 4.2 Required Power and Data Cables