Acopia ARX 1000, Hardware Installation Manual

Page: 59 / 78

Booting the Switch
ARX®1000 Hardware Installation Guide 6 - 11
in the format integer [1-4095].(default=1003) # <Enter>
The UUID should only be entered if this chassis is replacing a failed chassis
and the entered UUID should match the UUID of the failed chassis.
11. Enter the chassis's UUID
in the format
xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx.(default=6df0854c-6af4-11d8-954a-f844c83bc5f3) #
876616f6-79ac-11d8-946f-958fcb4e6e35
The crypto-officer is the most privileged user in the system.
12. Enter the crypto-officer username
in the format text (1-28 characters). #
admin
13. Enter the crypto-officer password
in the format text (6-28 characters). #
mypassword
Confirm the crypto-officer password # mypassword
A system password is required for access to the master key.
14. Enter a system password
in the format text (12-28 characters). #
tr1ple$ecRET
Confirm the system password # tr1ple$ecRET
This is the master-key question, where you use the encrypted master key and
the wrapping password from the redundant peer:
The master key is used to encrypt critical security parameters.
15. Enter the master key
in the format base64-encoded key or keyword 'generate'.(default=generate) #
2oftVCwAAAAgAAAApwazSRFd2ww/H1pi7R7JMDZ9SoIg4WGA/XsZP+HcXjsIAAAADDRbMCxE/bc=
The wrapping password is used to encrypt and decrypt the master key.
16. Enter the wrapping password
in the format text (6-28 characters). #
an0ther$ecretpw
Confirm the wrapping password # an0ther$ecretpw
Configuration Summary
Management IP Address 10.1.23.12
Management IP Mask 255.255.255.0
Management Gateway 10.1.23.1
Power Configuration 110
Private IP Subnet 169.254.94.0
Private IP Mask 255.255.255.0
Private VLAN 1002
Private Metalog VLAN 1003
Chassis GUID d7270d56-9e39-11d8-83e1-a21e0cbcc384
Switch Password #######
Switch MasterKey
2oftVCwAAAAgAAAApwazSRFd2ww/H1pi7R7JMDZ9SoIg4WGA/XsZP+HcXjsIAAAADDRbMCxE/bc=
Wrapping Password #######
Crypto-officer Username admin
Crypto-officer Password #######
Enter 'yes' to load configuration or 'r' to restart # yes
You have completed the switch startup configuration.
The switch will now initialize the local database.
When the login prompt appears, log into the switch using
the crypto-officer's username and password.