Acopia ARX 1000, Hardware Installation Manual

Page: 60 / 78

Chapter 6
6 - 12
Closing configuration file.
Processing configuration file. (boot-config)
...
User Access Authentication
Username: admin
Password: mypassword
SWITCH>
The switch is now ready for configuration through the GUI or CLI.
To join it with its redundant peer, you can use the standard practice of
copying and applying the failed switch’s running config:
SWITCH> enable
SWITCH# copy ftp://juser:jpasswd@ftp.wwmed.com/a1kconfig scripts running
SWITCH# show scripts
scripts
running Apr 12 17:45 2.1k
SWITCH# run scripts running
The running-config script set up all local parameters, such as the hostname
and the network settings:
SWITCH# ; ARX1000
SWITCH# ; Version 1.01.000.05876 (Aug 15 2004 19:18:40) [nbuilds] BETA
SWITCH# ; System UUID 876616f6-79ac-11d8-946f-958fcb4e6e35
SWITCH# ;
SWITCH# config
SWITCH(cfg)# logging level all notice
SWITCH(cfg)# exit
SWITCH# ;=============================== system ================================
SWITCH# config
SWITCH(cfg)# clock timezone 5
SWITCH(cfg)# hostname prtlndA1k
prtlndA1k(cfg)# ...
prtlndA1k(cfg)# exit
prtlndA1k#
If you copied the private subnet and mask from the defunct switch, this
completes the switch replacement. Otherwise, the new switch learns its
private subnet from its peer, re-configures itself, and reboots. (A reboot is
necessary to change the private subnet of an ARX.)
See the ARX CLI Network-Management Guide for detailed configuration
instructions.