Acon OGM-331 User Manual Download | Manualshive

Page: 46 / 53

background image

42

infectious diseases, even after you have performed cleaning and disinfection.
Please follow proper precautions when handling your meter and lancing device.

No  signs  of  meter  or  lancing  device  deterioration  in  appearance  or  performance
were observed after 260 cycles of the recommended pre-cleaning and disinfection
procedure.  However,  you  should  always  inspect  your  meter  and  lancing  device
after performing the cleaning and disinfection procedure. External signs of meter or
lancing  device  deterioration  might  include  polymer  crazing  (thin  silver  streaks),
cracking,  swelling,  dissolving,  softening  or  becoming  brittle.  Signs  of  meter
performance deterioration might include buttons not functioning properly, audio not
working,  missing  display  segments,  error  messages  during  testing  or  control
solution  test  results  that  are  out  of  range.  Signs  of  lancing  device  performance
deterioration might include reduced functionality of the lancing depth adjustment,
arming slider or firing button.

If any signs of external or performance deterioration are observed on your meter or
lancing device after cleaning and disinfection, please stop using your meter and
lancing device and contact Customer Support at 1-800-838-9502 for assistance.

«
...
44
45
46
47
48
...
»

Summary of Contents for OGM-331






















































Reviews:

No comments

Related manuals for OGM-331

Brand: Gima Pages: 49

Brand: Innovia Pages: 32

Brand: MABIS Pages: 10

Brand: Gamma Pages: 256

Digital Goniometer

Brand: Halo Pages: 44

Brand: IBP Pages: 3

Brand: HemoCue Pages: 104

ONETOUCH BASIC (WITH DATA PORT)

Brand: Lifescan Pages: 98

ONE TOUCH BASIC BLOOD GLUCOSE MONITORING SYSTEM

Brand: Lifescan Pages: 103

Brand: ForaCare Pages: 7

Brand: ForaCare Pages: 48

Brand: ForaCare Pages: 65

Brand: ForaCare Pages: 80

Brand: ForaCare Pages: 76

Brand: ForaCare Pages: 104

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands