Acon OGM-331 User Manual Download | Manualshive

Page: 21 / 53

background image

17

will  be  displayed  and  voiced.  Press  the  Left  (◄)  button  to  switch.  Press  the
Right  (►)  button  to  confirm  your  selection.  When  the  Ketone  indicator  is
enabled, if the test result is higher than 300 mg/dL, the symbol of "Ketone?" will
appear on the display.

9.

Hyper Indicator:

The meter comes with the Hyper indicator feature disabled.

Wait for the meter to say “

Hyperglycemia Indicator

” to set it. The words “

On

”

or “

Off

” will be displayed and voiced. Press the Left (◄) button to turn the

Hyper indicator “On” or “Off”. Press the Right (►) button to confirm your
selection. When the Hyper indicator is “Off”, pressing the Right (►) button will
take you to the Hypo indicator set up. When the Hyper indicator is “On”,
pressing the Right (►) button will go to the Hyper indicator level set up. At the
Hyper level set up, press the Left (◄) button to adjust the Hyper level. Press the
Right (►) button to go to the Hypo indicator set up.

Note

:

The meter allows the hyperglycemia level to be as low as 120 mg/dL or

higher. The hyperglycemia level should be above the hypoglycemia level.
Consult your doctor before determining what your hyper blood glucose level is.

10.

Hypo Indicator:

The meter comes with the Hypo indicator feature disabled.

Wait for the meter to say “

Hypoglycemia Indicator

” to set it. The words “

On

”

or “

Off

” will be displayed and voiced. Press the Left (◄) button to turn the Hypo

indicator “On” or “Off”. Press the Right (►) button to confirm your selection.
When the Hypo indicator is “Off,” pressing the Right (►) button will go to the
Test Reminder set up. When the Hypo indicator is “On”, pressing the Right (►)

«
...
19
20
21
22
23
...
»

Summary of Contents for OGM-331






















































Reviews:

No comments

Related manuals for OGM-331

Brand: Sejoy Pages: 53

Brand: A.MENARINI Pages: 2

Brand: made for movement Pages: 16

Brand: NOVA BIOMEDICAL Pages: 74

Brand: Metene Pages: 38

Brand: OneTouch Pages: 31

GlucoCheck Advance

Brand: TESTAMED Pages: 49

ACCU-CHEK FastClix

Brand: Roche Pages: 2

Accu-Chek Advantage

Brand: Roche Pages: 52

Accu-Chek Active

Brand: Roche Pages: 70

ACCU-CHECK Active

Brand: Roche Pages: 144

EasyTouch BluLink

Brand: MHC Medical Products Pages: 48

Brand: General Life Biotechnology Pages: 21

COMFORT plus G30a

Brand: Fora Pages: 100

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands