38
meter data port. Meter automatically enters “PC” mode.
Notes:
When a test strip is already inserted into the meter and meter is waiting for
a sample to be applied, plugging in the data transfer cable will produce an
E-12 error message, and the meter will not automatically switch to “PC”
mode.
If the meter is in “PC” mode, inserting a strip into the meter will not switch it
to sample application mode.
3. Run the PC data transfer software, and refer to the instructions from the
software for how to transfer records.
4. During the data transfer, the meter will display “to” and “PC”. This indicates the
data is being transferred from the meter to the PC.
5. Once the data transfer is complete, the meter will display “End” and “PC”.
6. After data transfer from meter to PC is completed, press the Right (
►
) button to
turn off the meter. If nothing else happens to meter 2 minutes after data
transfer from meter to PC is completed, the meter will automatically turn off. In
this case, if you want to enter “PC” mode again, press the left (◄) and Right (
►
)
buttons together.
See the User’s Guide included with your
On Call
®
Diabetes Management
Software Kit for detailed instructions.
Summary of Contents for OGM-331
Page 1: ......
