ACOEM Meax DU 01, User Manual

Page: 133 / 254

12.11
The screen displays the tool holder with the
SR sensor to the left and the main spindle
with the SM sensor to the right.
The rotational angles for each sensor are
displayed at the top. These angles are relative
to the machine bed slant.
The measurement is carried out by register
values in four positions, 0°, 90°, 180° and
270°. The small circles show where to rotate
the sensors.
NOTE: Both the sensors must be inside 0.1°
at each position in order to get a good result.
Set the sensors at the first measurement
position, at the rotational angle 0°.
Touch the measurement icon.
This registers the first
measurement position.