ACKERMANN EURACOM P4 User Manual Download

Page: 38 / 162

During

conversation

Accept a call waiting and terminate active connection

You are having a conversation

You hear the call waiting tone

Press Termination key. Current connection
is terminated, call waiting is accepted.

Note:
You may also accept the call by placing
down the receiver. The call waiting will
then be signalled as normal ringing.

Switch off call waiting for the current connection

You are having a conversation.

Press Call key. For the time of the
conversation no further calls will be
indicated by call waiting.
Demands for connection will be
transferred to the call list.

IMPORTANT NOTE!

•

The “locked call waiting” will be indicated during conversation by a flashing
symbol “silent signalling” signal in the display.

•

The temporary call waiting lock will be cancelled automatically with the end of
the call.

0,242 POUNDS

1:26

06838471112

CALL WAITING FROM:
02914635

27.10.98

1:26

02914635

0,242 POUNDS

1:26

06838471112

0,242 POUNDS

1:26

06838471112

C w

Futher caller (call waiting)

Summary of Contents for EURACOM P4



































































































































































Search results

Summary of Contents for EURACOM P4

Reviews:

Related manuals for EURACOM P4

Brands by name

Popular brands

ACKERMANN EURACOM P4, User Manual

Search results

Summary of Contents for EURACOM P4

Reviews:

Related manuals for EURACOM P4

Brands by name

Popular brands