manualshive.com logo in svg

ACKERMANN EURACOM P4, User Manual

Share
Download
ACKERMANN EURACOM P4 User Manual Download Page 101

102

6

Y

our telephone

switched  to

EURACOM P

ABX

Making telephone calls in a group (manager/office)

In order to make use of the manager office function, specific conditions have to be
arranged
(-> page 114 “programming of manager/office mode”). In the following examples it is
assumed, that the used EURACOM 

P4

  is configured as subscriber 23 connected to

the 2. S

0

 bus of a EURACOM 182 and is used as an office telephone. For the mana-

ger key manager 1 (subscriber 32 on 3. S

0

 bus) has been selected.

Call manager

<

EURACOM 

P4

 in Idle mode.

Lift receiver. Sound of dial tone.

Z

Press Dedicated key, programmed with
manager function. Manager 1 will be
called.

Note:
If you only press the Dedicated key, you
have entered the hands-free mode after
successful connection.

27.10.98

16:01

PLEASE DIAL

w y y

27.10.98

16:01

CALLING MANAGER 1

   32

w y w

Summary of Contents for EURACOM P4



































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands