ACKERMANN EURACOM P4 User Manual Download

Page: 34 / 162

convenient

telephone calls

switching on / off silent signalling

EURACOM

in Idle mode.

Press Call key. First entry of the call list
will be displayed.

Press Call key again.

switching on silent signalling

Press Programming key, to switch on
silent signalling. Thereafter EURACOM

afterwards has entered the Idle mode.

switching off silent signalling

Press Termination key for switching off
silent signalling. The EURACOM

afterwards has entered the Idle mode.

IMPORTANT NOTE!

In case of “silent signalling”:

•

a corresponding symbol appears in display.

•

a call waiting will also be indicated but silent.

•

nevertheless calls will only be indicated in the display or by the call LED. The
EURACOM

is not ringing.

•

an automatic call completion will nevertheless be signalled acoustically.

“Silent signalling” is possible in three stages:

•

all callers will be indicated silent.

•

a few numbers are signalled loud, the remaining silent.

•

a few numbers are signalled silent, the remaining loud.

For further description, see chapter “call filter” ( -> page 69 ).

Silent signalling

27.10.98

20:0

27.10.98

20:01

27.10.98 20:01

068388935

)(

CALLS
SILENT SIGNALLING

27.10.98

20:01

Summary of Contents for EURACOM P4



































































































































































Search results

Summary of Contents for EURACOM P4

Reviews:

Related manuals for EURACOM P4

Brands by name

Popular brands

ACKERMANN EURACOM P4, User Manual

Search results

Summary of Contents for EURACOM P4

Reviews:

Related manuals for EURACOM P4

Brands by name

Popular brands