manualshive.com logo in svg

ACKERMANN EURACOM P4, User Manual

Share
Download
ACKERMANN EURACOM P4 User Manual Download Page 47

48

3

During

conversation

Looking up charging information

The charging information since last deletion is stored and summarised. It is possible
to display the total charging information or the total units, as well as the charging
information and units of the last connection, be displayed.

G

EURACOM

 P4

 in Idle mode.

Press Charging key several times.
One after another are displayed:
date and time.

G

Charging information and duration of
connection (last call).

G

Units and duration of connection (last
call).

G

Total charging information.

G

Total units.

Note:
In Idle mode the display of charging
information changes to the display of date
and time after a few seconds. It is possible
to display the charging information during
a phone call. After a few second th current
charging information and the conversation
time appear in the display. To delete
charging factor, currency and charging
information (->page 66).

20.10.98

12:36

y

   

0,242 POUNDS

 1:34

y

 

2 UNITS

 1:34

y

   

8,710

 

POUND TOTAL

y

  

72 UNITS TOTAL

y

Summary of Contents for EURACOM P4



































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands