Gen II
User Manual
7-32 – Main Rotor Track & Balance
Chapter 7
Revision 3.00, Apr 2020
To review different conditions within the same run, press either the [
] or [
] key.
To review data for a different run, press either the [
] or [
] key.
To view adjustments made for the current run, press the [F1] “ViewAdj” key. See
paragraph 7.3.2.
To view the measurements on a Polar Chart, press the [F4] “Polar” key. (See Chapter 24
for additional navigation instructions for the Polar Chart view.)
7.3.2.
– View Main Rotor Track and Balance
The “View Main Rotor Track and Balance” screen appears as shown above. This screen presents
both the suggested and installed adjustments for the run number and chart name displayed.
Press either the [
] or [
] keys to view different chart types for the same run.
Press the [
] or [
] key to change the current run.
Press the [F1] “ViewMeas” key to return to the “Review Job” screen as shown in
paragraph 7.3.1.
Press the [F2] “View Chart” key to view the polar chart influence information for the job
as shown in paragraph 7.3.3.
