Altos R5250 Installation Configuration Guide
34
Network Utility Installation
The ForceWare Network Access Manager is included in the chipset driver
package. The ForceWare Network Access Manager will be installed
automatically when you installing the chipset driver package.
Windows Server 2003 R2 Enterprise x64 Edition SP2 Installation
(with onboard SATA RAID)
Below information describes how to manually install Windows Server 2003 R2
Enterprise x64 Edition on Altos R5250 with onboard SATA RAID.
Drivers Required
For Windows 2003 x64 Installation, the following device drivers are required.
Device Version
Directory on EasyBUILD
Onboard SATA
RAID
5.10.2600.678 \Disk\R5250\onboard\sataraid\x64\ws0
3\
Onboard NVIDIA
NFP 3600 Chipset
Package 9.18
\Disk\R5250\onboard\Chipset\x64\ws03
\
Onboard NVIDIA
nForce Networking
Controller
65.2.0.0
Including in chipset driver package
9.18
Onboard XGI Z9s
6.14.10.900
\Disk\r5250\onboard\xgiz9s\x64\ws03\
ATI FireGL V5200
8.323.1.0
\Disk\R5250\graphic\V5200\x64\ws03\
Software Required
The management utility for onboard SATA RAID and NIC can be found in the
EasyBUILD 8.0 build 100 (or later).
Software
Version
Directory on EasyBUILD
Onboard SATA
RAID Utility
5.10.2600.68
1
Including in chipset driver package
9.18
ForceWare Network
Access Manager
65.16
Including in chipset driver package
9.18
Configuring onboard SATA RAID
Please refer to the Appendix A. for the onboard SATA RAID configuration.
Installation Tips
1.
As Windows Server 2003 R2 x64 can’t recognize the onboard SATA RAID,
you need to make a driver diskette from the EasyBUILD 8.0 build 100 first
before the installation.
2.
Press F6 at the beginning of installation for providing the driver diskette
for the onboard SATA RAID controller.
3.
You will see NVIDA RAID CLASS Driver (required) and NVIDIA nForce
Storage Controller (required) listed. Please select both of them to install.
