Altos R5250 Installation Configuration Guide
10
Gigabit Ethernet Driver Installation
The Gigabit Ethernet driver is included in the chipset driver package. The
Gigabit Ethernet driver would be installed automatically when you installing
the chipset driver package.
VGA Driver Installation (onboard VGA)
1.
Windows will treat onboard VGA as Standard VGA device. You can find
the XGI Z9s driver in EasyBUILD 8.0 build 200. Please insert the EasyBUILD
8.0 build 200 into the optical drive.
2.
Expand Drivers -> Altos R5250 -> Graphics adapters -> XGI Z9s, select
Windows Server 2008 x64 and click on Setup.
3.
Click on Display Driver and follow the instruction to install the VGA driver.
4.
Please reboot the server after the driver is installed.
5.
After the system rebooted, you would see XGI Z7/Z9/Z9s/Z11 v1.09.10
listed in Display adapters in Device Manager.
VGA Driver Installation (ATI FireGL V5600)
NOTE. With ATI FireGL V5600 installed, you need to disable onboard VGA
controller first from BIOS before you install the ATI FireGL V5600 driver,
1.
Press F2 during the POST to enter the BIOS. After you entering the BIOS,
select Advanced -> PCI Configuration -> Onboard VGA Control, press
Enter and change the setting from Enabled to Disabled press. And then
press F10 to save configuration changes and reboot system.
2.
After you reboot and entering the OS, you will see Standard VGA
Graphics Adapter and one Video Controller under Other Device in
Windows Server 2008 Device Manager for ATI FireGL V5600.
