Altos R5250 Installation Configuration Guide
92
ATI FireGL V5200
8.35.5
\Disk\R5250\graphic\V5200\rhel5
Software Required
The management utility for LSI MegaRAID SAS 8204ELP can be found in the
EasyBUILD 8.0 build 100 (or later).
Software
Version
Directory on EasyBUILD
MegaRAID Storage
Manager
2.30 \app\R5250\sas\8204ELP\Linux\
Configuring LSI MegaRAID SAS 8204ELP
Please refer to the Appendix D. for the LSI MegaRAID SAS 8204ELP
configuration.
Installation Tips
1.
Since Red Hat Enterprise Linux 5 cannot recognize the MegaRAID SAS
8204ELP, you need to make a driver diskette from the EasyBUILD 8.0 build
100 (or later) first before the installation.
2.
Type linux dd when the prompt boot: appears at the start.
3.
Please select the sda as the Driver Disk Source.
4.
Follow the instruction to load the driver for MegaRAID SAS 8204ELP from
the driver diskette.
5.
When installing MSM (MegaRAID Storage Manager) for MegaRAID SAS
8204ELP after installation complted OR if you have installed the ATI
FireGL V5200 in the system, you are required to manually to select/install
additional package at the Package Installation Defaults.
6.
At the Package Installation Defaults, select Customize software packages
to be installed and click Next.
7.
At the Package Group Selection step, hold the shift key to select all the
listed packages in the right pane under Development, and right click on
all the items you just selected and then click “Select all optional
packages”.
8.
After selecting the entire package under Development, click Next to
follow the normal procedure to finish the installation.
Gigabit Ethernet Driver Installation
The Gigabit Ethernet driver installation is the same as SAS daughter board
installed. Please refer to the Red Hat Enterprise Linux 5.0 Installation (SAS
Daughter Board) Gigabit Ethernet Driver Installation section.
VGA Driver Installation (onboard XGI Z9s)
The XGI Z9s driver installation is the same as SAS daughter board installed.
Please refer to the Red Hat Enterprise Linux 5.0 Installation (SAS Daughter
