Acer EL1300 User Manual Download Page 39

Page: 39 / 80

Add-in cards

The computer does not recognize an add-in

card

•

Shut down and restart your computer.

•

Make sure that you have installed the

required software. For more information,

see the documentation that came with

your add-in card.

Audio

See

“Sound” on page 46

CD or DVD drives

See

“Optical disc drives” on page 42

DVD drives

•

See

“CD or DVD drives” on page 29

Ethernet

You cannot see the other computers on your

network

•

Make sure that your Ethernet cable is

plugged into the Ethernet jack on your

computer. Make sure that the other end

is plugged into a router.

•

Make sure that all computers are

plugged into a powered electrical outlet

and turned on.

•

Make sure that the router is plugged into

a powered electrical outlet and turned

on. Most routers have lights that indicate

they are working. For more information,

see

the documentation that came with

your router.

•

Make sure that all computers on your

network have the same workgroup

name.

Summary of Contents for EL1300

















































































Search results

Summary of Contents for EL1300

Reviews:

Brands by name

Popular brands

Acer EL1300, User Manual

Search results

Summary of Contents for EL1300

Reviews:

Brands by name

Popular brands