manualshive.com logo in svg

Acer EL1300, User Manual

Share
Download
Acer EL1300 User Manual Download Page 75

65

7

Use of pulse dialing, when this equipment is connected to the same line as 
other equipment, may give rise to bell tinkle or noise and may also cause a 
false answer condition. Should such problems occur, the user should NOT 
contact the telecom Fault Service.

8

This equipment may not provide for the effective hand-over of a call to 
another device connected to the same line.

9

Under power failure conditions this appliance may not operate. Please ensure 
that a separate telephone, not dependent on local power, is available for 
emergency use.

Laser compliance statement

The CD or DVD drive used with this computer is a laser product. 
The CD or DVD drive's classification label (shown below) is located on the drive.
CLASS 1 LASER PRODUCT
CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE 
TO BEAM.
APPAREIL A LASER DE CLASSE 1 PRODUIT
LASERATTENTION: RADIATION DU FAISCEAU LASER INVISIBLE EN CAS 
D’OUVERTURE. EVITTER TOUTE EXPOSITION AUX RAYONS.
LUOKAN 1 LASERLAITE LASER KLASSE 1
VORSICHT: UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET 
NICHT DEM STRAHLL AUSSETZEN
PRODUCTO LÁSER DE LA CLASE I
ADVERTENCIA: RADIACIÓN LÁSER INVISIBLE AL SER ABIERTO. EVITE EXPONERSE A 
LOS RAYOS.
ADVARSEL: LASERSTRÅLING VEDÅBNING SE IKKE IND I STRÅLEN.
VARO! LAVATTAESSA OLET ALTTINA LASERSÅTEILYLLE.
VARNING: LASERSTRÅLNING NÅR DENNA DEL ÅR ÖPPNAD ÅLÅ TUIJOTA 
SÅTEESEENSTIRRA EJ IN I STRÅLEN
VARNING: LASERSTRÅLNING NAR DENNA DEL ÅR ÖPPNADSTIRRA EJ IN I STRÅLEN
ADVARSEL: LASERSTRÅLING NAR DEKSEL ÅPNESSTIRR IKKE INN I STRÅLEN

LCD pixel statement

The LCD unit is produced with high-precision manufacturing techniques. 
Nevertheless, some pixels may occasionally misfire or appear as black or 
red dots. This has no effect on the recorded image and does not constitute 
a malfunction.

Macrovision copyright protection notice

"U.S Patent Nos. 4,631,603; 4,819,098; 4,907,093; 5,315,448; and 6,516,132."
This product incorporates copyright protection technology that is protected by 
U.S. patents and other intellectual property rights. Use of this copyright protection 

Summary of Contents for EL1300

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands