Machine Maintenance Procedures
3-23
Converter Board Removal
0
Prerequisite:
Rear Cover Removal
1.
Locate converter board (A) on front cover. (Figure 3-22)
Figure 3-22.
Inverter Board
2.
Disconnect the following cables:
Converter to mainboard cable (B) from converter board connector (C)
Converter to panel cable (F) from converter board connector (E)
3.
Remove screws (D) from front cover.
4.
Remove converter board.
Converter Board Installation
0
1.
Install converter board (A) to front cover. (Figure 3-22)
2.
Install and secure screws (D) to front cover.
3.
Connect the following cable:
Converter to panel cable (F) to converter board connector (E)
Converter to mainboard cable (B) to inverter board connector (C)
4.
Install rear cover.
ID
Size
Quantity
Screw Type
D
M3.0x4.0
2
A
B
C
D
D
E
F
Summary of Contents for Aspire Z3801
