Acer Aspire EasyStore Series User Manual Download Page 144

Page: 144 / 148

6 Troubleshooting

130

To update your home server with Software Update utility:

Make sure the Aspire easyStore Series Software Update utility is
installed on the computer. Refer to previous section for detailed
instruction.

On your computer, click Start > Programs > Aspire easyStore Series
Software Update > Software Update.

In the Home Server field, select the home server you want to
update. You can click Rescan to refresh the list.

In the Software\BIOS field, click Browse to specify the software/
BIOS package which will be updated to the home server.

Enter your name and password.

Select the “Remember Account” check box if you want the
account you entered to be shown the next time you perform
software update.

Click Install and follow onscreen instructions to complete updates.

Summary of Contents for Aspire EasyStore Series




















































































































































Search results

Summary of Contents for Aspire EasyStore Series

Reviews:

Acer Aspire EasyStore Series, User Manual, Page: 144 / 148

Search results

Summary of Contents for Aspire EasyStore Series

Reviews: