Acer ALTOS R910 Series, User Manual

Page: 97 / 210

87
7 Observe the post-installation instructions described on page 38.
Installing the SAS RAID adapter
Note: The SAS RAID adapter is specially hardware-keyed and
restricted to PCI Express slots 3, 4, and 5. Refer to “Rear panel” on
page 15 for the location of the PCI Express slots.
1 Observe the ESD precautions and pre-installation instructions
described on page 37.
2 If a PCI card is installed in PCI slot 3, 4, or 5, remove the card. For
instructions on removing a PCI card, see page 81
.
3 Remove the SAS RAID adapter from its protective packaging.
4 If you want to install a RAID activation key, RAID cache, RAID BBU
on the adapter, see page 94 for instructions.
5 Attach the SAS data cable to the adapter (A) .
6 Rotate the slot retention latch on the rear of the card slot upward
(B) .
7 Pull up the slot cover (C) .
8 Align then insert the adapter in the PCI slot 3, 4, or 5. Make sure
that the card is properly seated
(D) .
9 Rotate the retention latch downward.
10 Observe the post-installation instructions described on page 38.