3 System upgrade
68
To remove a PCI riser board
1
Observe the ESD precautions and pre-installation instructions
described on page 35.
2
Remove the CPU air duct. Perform the instructions described in “To
remove the CPU air duct” section on page 42.
3
Remove the PCI riser assembly from the server. See “To remove the
PCI riser assembly” section on page 65.
4
Remove any installed PCI cards from the riser board. See “To
remove a PCI card” section on page 69.
5
Press the blue release lever at the end of the PCI riser board
(A)
.
6
While holding the lever in, press firmly on the other end of the
board to disengage the board from the assembly
(B)
7
Remove the riser board from the PCI riser assembly
(C)
.
8
Store the riser board in an antistatic protective wrapper.
9
Repeat steps 4 through 7 to remove the other riser board.
10 Observe the post-installation instructions described on page 36.
To install a PCI riser board:
1
Observe the ESD precautions and pre-installation instructions
described on page 35.
2
Remove the CPU air duct. Perform the instructions described in “To
remove the CPU air duct” section on page 42.
Summary of Contents for Altos R720 Series
