manualshive.com logo in svg

Acer Altos G540 M2 Series, User Manual, Page: 17 / 221

Share
Download
Acer Altos G540 M2 Series User Manual Download Page 17

7

Hardware options

Note: 

To purchase the any of the following hardware options, 

contact your local Acer representative. 

•

Intel® Xeon® processor 5500 series:

•

2.66 – 2.93 GHz with 8 MB shared cache, 6.40 GT/s QPI

•

2.26 – 2.53 GHz with 8 MB shared cache, 5.86 GT/s QPI

•

1.86 – 2.13 GHz with 4 MB shared cache, 4.80 GT/s QPI

•

1.86 GHz with 4 MB shared cache, 4.80 GT/s QPI

•

Memory

•

Registered DDR3 1333 MHz ECC DIMMs: 1/2/4/8 GB

•

Unbuffered DDR3 1333 MHz ECC DIMMs: 1/2/4 GB

•

HDD:

•

2.5” SAS (10,000 RPM) HDD: 73/146/300 GB

•

2.5” SAS (15,000 RPM) HDD: 36/73/146 GB

•

2.5” SATA 3 Gb/s HDD: 250/320/500 GB

•

3.5” SAS (15,000 RPM) HDD: 147/300/450 GB

•

3.5” SATA 3 Gb/s HDD: 320/500/640 GB, 1/1.5 TB

•

Daughter cards/modules:

•

TPM module

•

Add-on cards:

•

ASC/3S single-channel U320 SCSI HBA (for backup device)

•

ASSC/3D dual-port SAS HBA (for backup device)

•

ASSC/3Q four-port 3 Gb SAS HBA

•

ASSRC/3O eight-port 3 Gb SAS RAID HBA

•

AFC/4S single-port 4 Gb FC HBA

•

AFC/4D dual-port 4 Gb FC HBA

•

Gigabit Ethernet server adapter

•

PCI Express® x16 graphics card

•

Storage drives:

Summary of Contents for Altos G540 M2 Series






























































































































































































































Reviews:

No comments