Acer Altos G540 M2 Series User Manual Download Page 159

Page: 159 / 221

151

Loading the onboard LSI SATA RAID default setting

In the onboard LSI RAID Configuration Utility, select

Objects

from

the Management menu.

Select

Adapter

from the Objects list.

The available adapter options will be displayed.

Press

Enter

in the adapter list.

The adapter settings will be displayed.

Select

Factory Default

, then

YES

to load the default settings.

Close the configuration utility.

Press

Ctrl

Alt

Del

to reboot the system.

Creating the RAID 1 volume

In the onboard LSI RAID Configuration Utility, select

Configuration

from the Management menu.

Select

New Configuration

from the Configuration menu, then

select

YES

to continue.

An array selection window displays the devices connected to the
current controller.

Press the arrow keys to choose the specific physical drives, then
press the space bar to associate the selected drive with the current
array.

The indicator for the selected drive change from READY to
ONLINE.

Add two more drives to the current array, then press

Enter

Press

Enter

again to select another array to configure.

Press the space bar to select the array, then press

F10

to configure

the logical drive.

Accept the default RAID level (RAID1), then press

Enter

to return

to the array selection window.

Press

Enter

to end the array configuration.

Select

YES

to save the configuration, then press any key to return

to the Configuration menu.

Summary of Contents for Altos G540 M2 Series






























































































































































































































Search results

Summary of Contents for Altos G540 M2 Series

Reviews:

Related manuals for Altos G540 M2 Series

Brands by name

Popular brands

Acer Altos G540 M2 Series, User Manual

Search results

Summary of Contents for Altos G540 M2 Series

Reviews:

Related manuals for Altos G540 M2 Series

Brands by name

Popular brands