AXS
–
FL Step Manual
AXS
–
STEP Manual vers 3.0
19
•
Unlock the mechanical motor lock (chapter 7) Move the step in and out and feel if it still runs
free.
•
Turn the step from upside down position to the normal position.
•
Connect the cable loom to the power source and let the step move in and out by the motor.
•
In closed position the step should stay on the plastic end lock of the sliding assembly and the
tube’s of the chassis.
Pull out the assembly in the out position
Connect the push rods to the chassis.
Re-connect the cable chain at the
chassis and the platform.
If the step is not running parallel with
the chassis it could be that the gear
arms are one tooth off line. Check if the
triangle marks at the gear arm are
opposite of each other.
