WinCEGeräte_Handbuch_Administration_v2 00_en
7 / 84
1.3 Device types - function and variations
1.3.1 List of ACD Windows CE devices
Device
name
Appli-
cation
Operating system
Processor
Clock rate
RAM
memory
Flash
memory
M210SE
Mobile
Windows CE 6.0
PXA 166
800 MHz
256 MB
512 MB
M215SE
Mobile
Windows CE 6.0
PXA 166
800 MHz
256 MB
512 MB
M260SE
Mobile
Windows CE 6.0
PXA 166
800 MHz
256 MB
512 MB
1.3.2 Switching on and off
Mobile data terminals (referred to hereinafter as MDTs) can be activated using the keyboard. There are two
ways to power down the device: either by fully switching it off (device boots when switched on, RAM-based
settings and files in RAM file system are lost) or by switching to the suspendmode (hibernation). When in
Suspend mode, the device can be resumed extremely quickly without booting and RAM-based data remain
intact. The device does however require electrical power during hibernation which limits the maximum
suspend time available.
To switch the device to a zero-power state (fully switched off), press the keys below in the sequence shown
and hold down for approx. 10 seconds.
Device name
Suspend and resume (switch on)
Zero-power (switch off)
M210SE
with On/Off key combination
C – menu (F4) – jump (F)
M215SE
with On/Off key combination
C – menu (F4) – jump (F)
M260SE
with key combination C – enter (orange)
C – arrow down – enter
(orange)
M260SE
with
(alphabetic
keyboard)
dedicated ON button
dedicated ON button
