WinCEGeräte_Handbuch_Administration_v2 00_en
64 / 84
If the registry was saved and the system re-booted, a security prompt is displayed after the session is
restarted although the highlighted section is not visible.
To ignore this message on further starts,
enable the Allow access.. option. Leave the
checkbox activated. Then press "TAB",
"Space", "TAB" and then "Enter" on the virtual
keyboard.
The final step is to save the registry.
To ensure that the RDP connection is launched immediately after the device is booted, an Autoapp.bat must
be generated that is stored in the \Flashdisk directory.
It could have the following contents:
@echo off
START \Flashdisk\System\GUIcmd.exe -close
start\windows\cetsc.exe \Flashdisk\MySession.rdp
exit
