AccuWeb MICRO 4000 NET, Instruction Manual, Page: 93 / 155

Operation
This section describes the operation of the Remote Station front panel keys and display.
Display:
•
The 2-line LCD display is divided into three fields as shown:
PARAMETER VALUE
POSITION
PARAMETER field: Name of the currently selected parameter.
VALUE field: Value of the currently selected parameter.
POSITION field: Current web position. This field is continuously updated.
•
Dimensional values that indicate length, position or offset are displayed in inches or
millimeters , depending on the setting of the Units parameter.
91).
•
The parameters are described in the Parameters section of this manual (page
•
At power-up, a software identification message is displayed for several seconds then the
display reverts to the format described above:
R e m o t e S t a t i o n
R M T 0 3 G P x x . x x
Front panel keys:
•
The front panel keys are defined as follows:
UP DOWN ENTER
•
To select a parameter press the ENTER key until the cursor is in the PARAMETER field, then
press the UP
or DOWN keys until the desired parameter is displayed.
•
To change a parameter’s value press the ENTER key until the cursor is in the VALUE field,
then press the UP
or DOWN keys until the desired value is displayed.
•
Numeric values can be changed by increments of 0.001, 0.01, 0.1, or 1 inches (or 0.1, 1, 10,
or 100 millimeters) by positioning the cursor on the corresponding digit in the VALUE field.
•
The keys automatically repeat if held down for more than one second.
Remote Station - Guide Point Adjust 90
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com