AccuWeb MICRO 4000 NET, Instruction Manual

Page: 36 / 155

Sensor A Type
5 5 0 Sensor A is an ultrasonic edge detector. This is the default setting.
5 5 1 Sensor A is an IR edge detector.
5 5 2 Sensor A is a Hi-Temp ultrasonic edge detector.
Sensor B Type
5 6 0 Sensor B is an ultrasonic edge detector. This is the default setting.
5 6 1 Sensor B is an IR edge detector.
5 6 2 Sensor B is a Hi-Temp ultrasonic edge detector.
Servo-Amplifier Fault
5 7 0 The SERVO-AMPLIFIER FAULT input is ignored. This is the default
setting.
5 7 1 If the SERVO-AMPLIFIER FAULT input is high (+5 VDC) and the
SERVO-AMPLIFIER INHIBIT output is not activated, then the controller
will display a flashing error code. Refer to page
42 for more information
about error codes.
5 7 2 If the SERVO-AMPLIFIER FAULT input is low (0 VDC) and the SERVO-
AMPLIFIER INHIBIT output is not activated, then the controller will
display a flashing error code. Refer to page
42 for more information
about error codes.
5 7 3 If the SERVO-AMPLIFIER FAULT input is high (+5 VDC), then the
controller will display a flashing error code. Refer to page 42 for more
information about error codes.
5 7 4 If the SERVO-AMPLIFIER FAULT input is low (0 VDC), then the
controller will display a flashing error code. Refer to page 42 for more
information about error codes.
AUXILIARY Output Function
for more information about the AUXILIARY output. Refer to page 48
5 8 0 The AUXILIARY output is off. This is the default setting.
5 8 1 The AUXILIARY output is on when Sensor A is nulled.
[continued on next page]
MICRO 4000
®
NET Controller
33
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com