94MS42 Rev. B1 S/W Ver. 2.06
17-1
17. Warranty
OLEC
Limited Warranty
OLEC
equipment is warranted against defects in material for ONE (1) Year from date
of purchase. Faulty parts will be repaired, replaced, or purchase price refunded at
OLEC
's
option, for the original Buyer, provided the parts have been replaced by authorized
personnel and are returned prepaid to the
OLEC
factory in Irvine, CA. Shipment must
be accompanied by proof of purchase and the Dealer/Distributor name.
This Warranty applies only to equipment which was installed and used according to
instructions and in the way it was intended to be used by the manufacturer. Unauthorized
repairs, use of non-
OLEC
parts and lamps, modification, or Serial Numbers that have
been removed or defaced, void this Warranty. Glass parts are not included in this
Warranty. Lamps are covered according to the Warranty below.
The
OLEC
Corporation and/or the Seller shall not be liable for any loss, damage or
injury arising out of the improper use of, the failure of, or the inability to use the
equipment. It is the Buyer's responsibility to ascertain the suitability of the equipment
for the application. The Buyer assumes all risk and responsibility for the proper
installation, for reading the Instruction Manual and retaining it with the equipment for
the safe use of the
OLEC
product. All operators must be made familiar with the proper
use and safe operation upon installation and periodically thereafter.
No one is authorized to assume any obligation, either on behalf of the
OLEC
Corporation
or the Seller, which is not in accordance with the above.
Lamp Warranty
Should any original
OLITE
Lamp fail prematurely when used in
OLEC
lights, it
should be returned promptly to
OLEC
, prepaid. It should be accompanied by proof of
purchase, explanation of the type of failure incurred, and the approximate useful life of
the lamp prior to failure. If it is determined by
OLEC
that the failure or shortened life
has been caused by faulty material or workmanship, full or partial replacement will be
extended to the Buyer.
IMPORTANT: The use of any lamp, other than those purchased or approved by
OLEC
will void this Warranty.
All Warranty Service should be handled through the Distributor
through whom the equipment was purchased.
Summary of Contents for AP42CL 8000
