Accuprint AP42CL 8000, Service Manual

Page: 41 / 134

94MS42 Rev. B1 S/W Ver. 2.06 5-1
5. Diagnostics
Output Diagnostics
One of the many advancements OLEC has introduced to the field is the
ability of its equipment to run a self-diagnostic check. All computer-
activated functions and all internal and external switches can be checked
out on the integrator display by using the numerical keypad.
Output Functions Check
• Press the
P
key on the integrator to power up the light, the front remote
switches, and the exposure unit's computer system.
[SEL_]
Press
1
,
2
,
3
, then
4
in sequence. The Vacuum window will read
[SEL_]
. This places you in select mode.
• Press the
6
key to enter the Diagnostics mode. The number in the
Vacuum window will be the sum of all values for peripherals that are
turned On.
[o000]
Press the
9
key to reset the Diagnostics mode. This turns Off all
peripherals. Therefore the Vacuum window will indicate
[o000]
.
• Refer to the Functions Table.
• Press the number key to actuate the desired function. The numerical value
shown in the table should appear in the Vacuum window.
• Press the function key number again to turn off the function. Press the
9
key to turn off all functions.
• Press the
0
key twice to return to normal operation.