Accu-Steam™ G2 Gas Service Manual
PAGE 16
SP8042-1609
Parts Identification, Removal and Installation
Fuse .75 Amp 250V
AT0E-2731-4
1. Unplug from wall receptacle.
2. Lower front access panel by removing the screws
in the upper corners of the panel.
3. Replace fuse.
Hi-Limit RTD Temp Sensor RTD Igniter
Fuse Block
Transformer
Fault Timer Hi-Limit Control board Ignition Control Module
Main Control Board
Control Relay
Control Valves
Tap
Control Relay
AT0E-2825-6
1. Unplug from wall receptacle.
2. Lower front access panel by removing the screws in
the upper corners of the panel.
3. Take note of wire location
4. Remove wires and hardware securing relay.
5. Reinstall in reverse order.
