Accu-Steam™ G2 Gas Service Manual
PAGE 17
SP8042-1609
Parts Identification, Removal and Installation
Digital Control Board
AT0E-3625-5
1. Unplug from wall receptacle.
2. Lower front access panel by removing the screws in
the upper corners of the panel.
3. Locate the main control board. Take note of wires
and their terminals, remove wires.
4. Remove nuts and washers securing board to panel,
remove panel.
5. Reinstall in reverse order.
Hi-Limit Control Board
AT0E-3880-1
1. Unplug from wall receptacle.
2. Lower front access panel by removing the screws in
the upper corners of the panel.
3. Locate the Hi-Limit control board. Take note of
wires and their terminals, remove wires.
4. Remove nuts and washers securing board to panel,
remove panel.
5. Reinstall in reverse order.
IMPORTANT NOTICE: Failure to unplug the unit
before pulling wires from the board could result in
fatal damage to the controller.
