Accu-Steam™ G2 Gas Service Manual
PAGE 13
SP8042-1609
Digital Controller
Change Cooking/ Default/ Preset Temperatures
1.
Turn the griddle on by pressing the
ON/OFF
(S5)
button.
2.
Hold the
UP
(S1) arrow in for 3 seconds until all 3 lights start to flash.
3.
Press the
UP
(S1) or
DOWN
(S4) arrow until desired temp is displayed.*
4.
Once the desired temp is displayed it can be saved as a preset temperature by immediately holding down
PRESET TEMP 1
(S2) or
PRESET TEMP 2
(S3), until unit shuts off. It can also be save as the default on
temp by turning off the griddle
Lock/Unlocked Note*
If temperature is unable to be adjusted, user may need to unlock the system by holding down the
ON/OFF
(S5) button and
Temp
(S6) button together for 8 seconds or until “ULOC” is displayed. Once the
temperatures are saved, it is recommend the user locks the system by holding down the
ON/OFF
(S5) button and
Temp
(S6) button together for 8 seconds or until “LOC” is displayed. This will allow
the cooks to only use the preferred settings.
NOTE:
Unplug griddle from wall receptacle before replacing the control
board in order to prevent damage to equipment.
When power is applied to the control, the control will configure itself to operate in accordance with the
parameters stored in memory. These parameters may be adjusted using Manager’s Mode.
