Accu-Steam™ G2 Gas Service Manual
PAGE 18
SP8042-1609
Parts Identification, Removal and Installation
Heat Lamp
AT0E-1800-2
Hi-Limit Lamp
AT0E-1800-2
Fault Lamp
AT0E-1800-2
1. Unplug from wall receptacle.
2. Lower front access panel by removing the screws in
the upper corners of the panel.
3. Locate the light bar and remove wires from lamp.
4. Remove nuts securing the light bar to the front
panel.
5. Remove lamp.
6. Reinstall in reverse order.
1. Unplug from wall receptacle.
2. Lower front access panel by removing the screws in
the upper corners of the panel.
3. Locate transformer and note the location of the
wires and their terminals, disconnect wires.
4. Removed nuts securing transformer.
5. Remove transformer.
6. Reinstall in reverse order.
Transformer
AT0E-2662-5
Fault Timer
ATOE-2500-3
1. Unplug from wall receptacle.
2. Lower front access panel by removing the screws in
the upper corners of the panel.
3. Locate the Fault timer, take note of wire location
and remove wires.
4. Remove hardware securing timer.
5. Remove timer.
6. Reinstall in reverse order.
7. Set timer pot to 6 seconds.