Accu-Chek Aviva Owner'S Booklet Download Page 266

Page: 266 / 316

260

Display Shows Possible Cause(s)

Possible Solution(s)

Invalid PIN

The wrong PIN was entered.

Select OK and re-enter the PIN shown on the pump

display.

Invalid Record
Time/Date

The time/date entered is

invalid (Add Data entries
cannot be set to occur in the
future).

Re-enter time/date.

Invalid Target
Range

The lower target range value

is above the upper target
range value.

Reset the target range values.

Enter the correct lower target range value and

upper target range value. See Chapter 5, Changing
Meter Settings.

The range selected conflicts

with your hyper and/or hypo
warning limit settings.

Reset range or revise warning limit settings and

re-enter range.

Enter the correct lower target range value and

upper target range value. See Chapter 5, Changing
Meter Settings.

LO bG Warning

Your blood glucose may be

lower than the measuring
range of the system.

Treat your low blood glucose as recommended by

your healthcare professional.

If you are experiencing any of the common

symptoms of low blood glucose, contact your
healthcare professional immediately.

51638_00048010155_C.indb 260

6/11/13 3:58 PM

Summary of Contents for Aviva





























































































































































































































































































































Search results

Summary of Contents for Aviva

Reviews:

Related manuals for Aviva

Brands by name

Popular brands

Accu-Chek Aviva, Owner'S Booklet

Search results

Summary of Contents for Aviva

Reviews:

Related manuals for Aviva

Brands by name

Popular brands