Accu-Chek Aviva Owner'S Booklet Download Page 242

Page: 242 / 316

236

Wash hands thoroughly with

soap and water.

WARNING

The effect of using more than one product interchangeably to

clean and disinfect the lancing device has not been tested. Always

use Super Sani-Cloth (EPA reg. no. 9480-4) to clean and disinfect

the lancing device. Do not use any other cleaning or disinfecting

solutions. Using solutions other than the Super Sani-Cloth could

result in damage to the lancing device.

NOTE

Roche has tested the approved product for a total of 520 cycles,

which is equal to cleaning and disinfecting once per week for a

5-year period.

51638_00048010155_C.indb 236

6/11/13 3:58 PM

Summary of Contents for Aviva





























































































































































































































































































































Search results

Summary of Contents for Aviva

Reviews:

Related manuals for Aviva

Brands by name

Popular brands

Accu-Chek Aviva, Owner'S Booklet

Search results

Summary of Contents for Aviva

Reviews:

Related manuals for Aviva

Brands by name

Popular brands