Acclaim Lighting Unity SNS2019, User Manual

Page: 11 / 56

9
USING A TENON MOUNT
Optional tenon mounts are available for use when Unity needs to be mounted
on top
of
a vertical pole. Tenon mounts are available for use with 2” and 4” (Schedule 40) poles of
sufficient rigidity for the weight of the fixture.
IMPORTANT: Tenon mounts are
suitable only for vertical pole
mounting where the fixture sits on
top of the pole. Tenon mounts must
NEVER be used to hang a Unity
fixture below a pole. For pendant-
type installations, use the pendant
mount set (see page 12).
TO USE A TENON MOUNT
1 Slide the tenon mount onto the
vertical pole and tighten the two
bolts on the side using a 1/4” (6mm)
Allen (hex) wrench.
2 Secure the Unity yoke to the tenon
mount using the supplied main bolt
and partially tighten using a 11/16”
(17mm) A/F wrench. Rotate the
fixture to the required position and
insert the pan control bolt - tighten
using a 1/4” (6mm) Allen (hex)
wrench. Fully tighten the main bolt.
3 Secure the feed cable neatly and
securely down the pole.
Main
bolt
Pan
control
bolt
Pole
bolts
Schedule
40 pipe