Acclaim Lighting Unity SNS2019, User Manual

Page: 34 / 56

32
USING THE AUTOMATION FEATURES (PHOTOCELL)
The fixture includes two related features which allow you to automate standalone operation:
•
The built-in photocell can trigger a pre-mixed color/white output when the ambient light
conditions fall below a pre-determined level.
•
The auto shutoff timer determines how long the fixture should remain outputting after it
has been triggered by the photocell.
For the photocell feature to successfully output a color/white mix, ensure:
•
There is no external DMX signal.
•
A color mix (or selected white) output setting is stored within the
Internal Color
option -
see page 31.
•
The Solo Behavior is set to
Internal Color Mode
- see page 31.
Note: The automation features can also be configured via RDM - see page 40.
TO CONFIGURE PHOTOCELL AUTOMATION
1 Enter the user menu (see page 26).
2 Use the or buttons to locate the
Photocell option and press ENTER . The display will
show
Photocell On/Off
.
3 Press ENTER . If the display shows
Off
, use the or buttons to change the entry to
On
and press ENTER .
4 Use the or buttons to show
Photocell Sensitivity
and press ENTER . The display
will show the ambient light level at which the fixture should begin outputting (
100
is
the most sensitive to light). Some experimentation will be required to determine the
optimum setting (the default is 70).
5 Use the or buttons to show the required sensitivity setting (from 0 to 100) and press
ENTER .
6 Use the or buttons to show
Photocell Timer
and press ENTER . The display will
show the number of hours that the fixture is currently configured to show output, once
triggered by the photocell.
7 Use the or buttons to show the required number of hours (from 1 to 24) and press
ENTER .
COLOR CALIBRATION
Each Unity undergoes ColorSync calibration at our Los Angeles headquarters in order
to maintain consistent color matching between fixtures when displaying the various
temperatures of white in 7 channel mode. It is possible to disable the internally held
calibration values with the possible result of noticeable differences in output between
neighboring Unity fixtures.
TO ENABLE/DISABLE COLOR CALIBRATION
1 Enter the user menu (see page 26).
2 Use the or buttons to locate the
Color Calibration
option and press ENTER . The
display will show the currently selected setting .
3 Use the or buttons to change the setting and press ENTER .