Acclaim Lighting Unity SNS2019, User Manual

Page: 40 / 56

38
SETTING THE CHANNEL MODE VIA RDM
For general information about the channel modes, see page 30.
TO SET THE CHANNEL MODE USING THE XMT-350
1 Connect the XMT-350 to the DMX input line of the Unity installation.
2 On the XMT-350, press the
MODE button, then use the arrow buttons to highlight the
RDM function and press the button to select. The XMT-350 will search for RDM devices
and after a short while the XMT-350 will display a list of all located fixtures. The fixture
highlighted in the list should show output from its emitters to identify itself.
3 If necessary, use the up/down buttons to highlight an alternative fixture.
4 Press the button to view details for the chosen fixture and then use the down button
to highlight the DMX PERSONALITY entry:
5 Press the button to view the options:
6 Use the up/down buttons to highlight the required channel mode and press the
button.
7 Press the button to return to the previous screen.