Acclaim Lighting Unity SNS2019, User Manual

Page: 16 / 56

14
7 Complete the installation:
•
Carefully feed the power/control cord up through the
yoke , NPS pipe and top bracket into the mounting
surface hole and ceiling space above.
•
Raise up the cover plate and align it with the two
small holes in the underside of the top bracket.
•
Insert the two small bolts (
B
) removed earlier and
tighten.
•
Insert the two larger bolts (
A
) into the top bracket
holes that are either side of the NPS pipe. It is
important that the corresponding holes in the NPS
pipe align with these holes and the bolts are fully
engaged.
•
Plug the power/control cord into the socket on the
rear panel of the Unity fixture.
•
If necessary, tilt the fixture to the required angle by
loosening the pivot bolts.
6 Attach the pendant assembly (the NPS pipe, pendant yoke and Unity fixture) to the top
bracket.
•
With assistance from a co-worker, lift up the pendant
assembly to the top bracket.
•
Carefully engage the screw thread of the NPS pipe
with the top bracket and rotate the pendant assembly
clockwise to fully engage the thread.
•
Keep rotating the pendant assembly until the two
holes either side of the top bracket align with the
corresponding holes in the NPS pipe.
A
A
B
B